Design convector TCH 2510 E

Product Description for Design convector TCH 2510 E

Maximum heating output with intelligent automatic heating

Our energy-saving convectors of the TCH series are enjoying increasing popularity due to constantly rising heating costs. Why should you turn on the expensive oil or gas heating on cooler days when it can be easier and, above all, cheaper? On cooler days in the transition period to autumn or winter, when the stationary heating system is still switched off for cost reasons, the ultra-flat TCH 2510 E designer convector with its powerful 2,500 watt heating output, which can be infinitely adjusted via a thermostat, provides start-up-time-free, odorless and noiseless Feel-good warmth. This can be used as a floor-standing or wall-mounted unit.

No Trotec convector has more heating surface

The full and highly efficient aluminum heating element with an incredible length of approx. 110 centimeters and the aerodynamically shaped air outlets on the top ensure the best possible heat distribution in rooms up to 30 m² or 75 m³. Whether in the living room, in the bedroom or children's room, in offices, in the bathroom and wellness areas or in unheated garages, winter gardens or holiday apartments: where quick and / or additional warmth is required, the IP24 splash-proof and approved for damp rooms convector TCH 2510 plays E demonstrates its superiority over immovable heating solutions.

Uniform convection heat

In the convectors of the TCH series, the air in the device is heated by electrically heated wires and as a result rises as warm air, creating a natural suction that draws cold room air into the device. This creates a constant circulation of warm air throughout the room, which flows into every corner. The heat spreads evenly everywhere, thus preventing overheating or underheating of individual areas. As soon as the pre-set level of heat is reached, the device reduces the output and maintains the desired temperature.

Innovative window open detection protects against wasted energy

Regular ventilation is essential for a good and healthy indoor climate - especially in Corona times and the flu season. So that no unnecessary energy is wasted, the smart TCH 2510 E is equipped with an energy-saving window-open detection. If a window in the room is opened, the convector reduces the heating output in thermostat-controlled automatic mode until the window is closed again. In addition, permanent room temperature control with intelligent automatic heating reduces the already economical energy consumption of the TCH 2510 E. If the preset desired temperature in the range of 0 and 50 °C is reached, the heating element switches off fully automatically and only switches on again when reheating is required. Pretty clever! In this way, the convector's energy consumption remains pleasantly low and no expensive energy costs are thrown out the window.

Full equipment for warm times of wellbeing

The comfort features of the designer convector are rounded off by a room temperature and time display, two operating modes (automatic and weekly mode), stable feet with smooth-running castors for flexible use in different locations, a wall bracket, an hour meter and an extra-long power cable for maximum freedom of movement .

Cozy, warm interiors with comfort

Like all convectors of the TCH series, the TCH 2510 E also works with the effect of uniform convection heat and, like this, it can be used almost anywhere in private living areas or in the office: for example as a quick heat source when the main heating fails, as a reliable transitional heating before the start of the Heating season or for heating winter gardens, workshops, garages, hobby or basement rooms that are not connected to central heating.

Operating hours display - keeps an eye on consumption

Whether as a tenant or landlord - it is sometimes helpful to know how much heating costs have been incurred in a certain period of time. With the practical operating hours display, you can monitor and log the consumption of the TCH 2510 E to the exact hour.

Weekly mode - individual heating times and temperatures every day

Every day is different! At the weekend we usually spend more time at home and the need for heat is correspondingly greater. A programmable weekly timer enables you to program individual heating times and room temperatures for each weekday. More warmth on the weekend and less warmth during the week when you leave the house in the morning? No problem! In week mode, individual room temperatures and heating times can be assigned to each day of the week. Pretty practical.

Child lock - for safe operation in the children's room

The child safety device protects the device settings of the convector from inquisitive children's hands. Once activated, the device settings can no longer be changed via the control panel.

Quick heat on cold days - nothing easier than that. The design convectors TCH 2510 E and TCH 1510 E convince with intelligent heating technology and uncompromisingly strong heating output.

Benefits for practice:

• Up to 2,500 W heating power for clean, condensation-free and odorless warmth
• Extra large heating element of approx. 110 cm length
• Temperature range adjustable between 0-50 °C
• Stepless thermal control
• Innovative window open detection
• Automatic temperature control / intelligent automatic heating
• Frost guard function
• Energy-efficient operation thanks to automatic shutdown when target values are reached
• Current room temperature display
• Timer function
• Weekly timer
• Operating hours display
• LCD display
• Parental controls
• Overheating protection
• Can be used as a wall or standing device