TTR 800 Desiccant Dehumidifier
SKU: 1110000150
Availability: Currently not in stock
'TTR 800 Desiccant Dehumidifier'
This dehumidifier works according to the adsorption principle. This not only allows a reliable and high dehumidification performance even at low suction temperatures, but it also enables to achieve lower dew points than condensation dehumidifiers.
0
/
Product Description
Technical Details
Equipment
Downloads
Details
Product Description
Due to inegrated heat recovery, and the electric energy management rank the TTR 800 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!
Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 8000 is a reliable dehumidifier.
Benefits in practice:
- Professional quality „made in Germany" - Original Trotec-fabrication
- Configurable change of direction of the air stream in all models
- Provided with diverse functions and equipment
- High efficiency thanks to assembly concept
- Thanks to various equipment options the product can be individually configured for every application
Standard equipment characteristics of TTR 800 at a glance:
- Stainless steel housing
- Wide range power supply
- Contol of rotor turning (rotor and motor)
- Overheat safety system with restart lock-out (regenaration air)
- Management of operating temperature
- Filter control (air flow and collect warning lights )
- Duoventic-control*
- Configurable change of direction of the air stream (conversion with little effort)
- Connecting terminals external on/off
- Hygrostat with connecting terminals
- Floating contacts (operation, disruption, filter)
Technical data of theTTR 800:
- Dehumidification performance: 3,6 kg/h
- Dry air flow rate: 95 0m³/h bei 300 Pa
- Electrical connection: 3x400 V / 50 Hz
- Heater of regenerated air: 4,1 kW
- Power consumption max.: 4,9 kW
- Dimensions LxWxH: 625 x 650 x 940 mm
- Weight: 85 kg
- Connections dry air inlet/ outlet Ø: 250 / 250 mm
- Connections regenerated air inlet/ outlet Ø: 160 / 160 mm
Possible additional options:
- Control module Millenium
- Flowmatic S
- Flowmatic M
- Humidity and temperature control
- Dew point sensor -80 °C ... +20 °C
- Touchscreen for control of the device
- Remote connection GSM
- Remote connection WLAN
- Heat exchanger module
- Electric reheater for dry air
- External Hygrostat HG 120
- External Hygrostat HG 125
- Transportframe (stackable), with wheels
*Per Duoventic is the performance of each fan independently adjustable by means of potentiometer, also the dampers are not needed
Technical Details
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.110.000.150 | |
| Dry air (in case of intake air 20°C / 60 % RH) | ||
| Dehumidification [kg/24h] | 86.4 | |
| Dehumidification [kg/h] | 3.6 | |
| Air volume free-blowing [m³/h] | 950 | |
| Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h] | 750 | |
| External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa] | 300 | |
| Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH) | 250 | |
| Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm] | 250 | |
| Regeneration air | ||
| Nominal air volume | Regeneration air [m³/h] | 130 | |
| External compression | Regeneration air [Pa] | 300 | |
| Connection inlet Ø | Regeneration air [mm] | 160 | |
| Connection outlet Ø | Regeneration air [mm] | 160 | |
| Operating principle | ||
| Operating principle | TTR Trisorp Dual | |
| Operating range | ||
| Min. temperature [°C] | -20 | |
| Max. temperature [°C] | 40 | |
| Min. humidity [% RH] | 0 | |
| Max. humidity [% RH (non-condensing)] | 100 | |
| Electrical values | ||
| Mains connection | 380 - 480 V, 50/60 Hz | |
| Nominal current consumption [A] | 7.5 | |
| Installed capacity [kW] | 4.9 | |
| Heating capacity [kW] | 4.1 | |
| Recommended fusing [A] | 16 | |
| Electric connection | ||
| Terminal connection | ||
| Automatic dehumidification | ||
| Non-stop dehumidification | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 734 | |
| Width (packaging excluded) [mm] | 649 | |
| Height (packaging excluded) [mm] | 942 | |
| Weight | ||
| (packaging excluded) [kg] | 85 | |
| Equipment, features and functions | ||
|---|---|---|
| Housing type | ||
| Stainless steel | ||
| Device version | ||
| Indoor installation (standard) | ||
| Hiring model | ||
| stackable | ||
| Shelter against the weather | ||
| Equipment | ||
| Wide-range voltage | ||
| Rotor rotation control (rotor and drive) | ||
| Overtemperature protection system with restart lock (regeneration air) | ||
| Operating temperature management (regeneration air) | ||
| Filter monitoring (per air current and collective warning light) | ||
| Duoventic control | ||
| Configurable air direction reversal (conversion requires minimal effort) | ||
| Terminals for external ON/OFF | ||
| Terminals hygrostat | ||
| Potential-free contacts (operation, fault, filter) | ||
| Operating hours counter | ||
| Air volume regulation | ||
| Integrated heat recovery | ||
| Hygrostat (electronic) | ||
| Hygrostat (mechanical) | ||
| Moisture control | ||
| Moisture and temperature registration | ||
| Sensor-supported Flowmatic control | ||
| Power meter | ||
| Ammeter | ||
| DIN socket for external ON/OFF | ||
| Regeneration heating design | ||
| Electric resistance | ||
| Electric PTC | ||
| Saturated vapour (4 bar) | ||
| Gas | ||
| Air pre- and post-treatment | ||
| Pre-cooling | ||
| After-cooling | ||
| Pre-heating | ||
| After-heating | ||
| Mobility | ||
| Transport frame | ||
| Swivel casters with brake | ||
| Trestle rollers/ fixed castors | ||
| Crane lifting gear | ||
| Forklift pockets | ||
standard equipment
optionally available
not available
Equipment
HG 120 S Hygrostat (from TTR 160)
Incl. taxes and duties Incl. taxes and duties
Immediately available
HG 125 Electronic Thermohygrostat
Incl. taxes and duties Incl. taxes and duties
Immediately available
Adapter transformer for thermohygrostat HG 125
Incl. taxes and duties Incl. taxes and duties
Immediately available
G4 Z-Line filter for TAC 750 E / 1500 and TTR 800 / 1400 / 2000 / 2800 / 3700
Incl. taxes and duties Incl. taxes and duties
Available again from week 51
Downloads
Bedienungsanleitung Adsorptionsluftentfeuchter TTR 800 / TTR 1400 (INT)
TRT-BA-TTR800-TTR1400-TC-001-INT.pdf (4.1 MB)
Details
Adsorptionstrockner TTR 800
Der Adsorptionstrockner TTR 800 ist ein professioneller Luftentfeuchter „made in Germany" für hohe Entfeuchtung auch bei niedrigem Taupunkt