TTR 2000 Desiccant Dehumidifier
Availability: Currently not in stock
'TTR 2000 Desiccant Dehumidifier'
This dehumidifier works according to the adsorption principle. This not only allows a reliable and high dehumidification performance even at low suction temperatures, but it also enables to achieve lower dew points than condensation dehumidifiers.
Due to inegrated heat recovery, and the electric energy management rank the TTR 2000 and the rest of the TTR-adsorption dehumidifiers among the most efficient of their kind!
Because of the robust housing and the technology, following highest industrial standards even under rough conditions the TTR 2000 is a reliable dehumidifier.
Benefits in practice:
- Professional quality „made in Germany"
- High dehumidification performance even at low temperatures
- Reliable silicagel sorption rotors in a washable and mechanically high-tensile design
- Integrated heat recycling process
- Electrical regeneration heaters
Technical data of theTTR 2000:
- Dehumidification performance: 10,8 kg/h
- Dry air flow rate: 2.350 m³/h by 300 Pa
- Electrical connection: 3x400 V / 50 Hz
- Heater of regenerated air: 12,5 kW
- Power consumption max.: 15 kW
- Dimensions LxWxH: 1.280 x 760 x 1.300 mm
- Weight: 230 kg
- Connections dry air inlet/ outlet Ø: 315 / 315 mm
- Connections regenerated air inlet/ outlet Ø: 200 / 200 mm
Possible additional options:
- Control module Millenium
- Flowmatic S
- Flowmatic M
- Humidity and temperature control
- Dew point sensor -80 °C ... +20 °C
- Touchscreen for control of the device
- Remote connection GSM
- Remote connection WLAN
- Heat exchanger module
- Electric reheater for dry air
- External Hygrostat HG 120
- External Hygrostat HG 125
- Transportframe (stackable), with wheels
Technical data | ||
---|---|---|
General information | ||
Article number | 1.110.000.171 | |
Dry air (in case of intake air 20°C / 60 % RH) | ||
Dehumidification [kg/24h] | 259.2 | |
Dehumidification [kg/h] | 10.8 | |
Air volume free-blowing [m³/h] | 2,350 | |
Nominal air volume | Dry air (in case of intake air 20 °C / 60 % RH) [m³/h] | 2,000 | |
External compression | Dry air (in case of intake air 20 °C / 60 % RH) [Pa] | 300 | |
Connection inlet Ø [mm] | Dry air (in case of intake air 20 °C / 60 % RH) | 315 | |
Connection outlet Ø | Dry air (in case of intake air 20 °C / 60 % RH) [mm] | 315 | |
Regeneration air | ||
Nominal air volume | Regeneration air [m³/h] | 380 | |
External compression | Regeneration air [Pa] | 250 | |
Connection inlet Ø | Regeneration air [mm] | 200 | |
Connection outlet Ø | Regeneration air [mm] | 200 | |
Operating principle | ||
Operating principle | TTR Trisorp Dual | |
Operating range | ||
Min. temperature [°C] | -20 | |
Max. temperature [°C] | 40 | |
Min. humidity [% RH] | 0 | |
Max. humidity [% RH (non-condensing)] | 100 | |
Electrical values | ||
Mains connection | 380 - 480 V, 50/60 Hz | |
Nominal current consumption [A] | 23 | |
Installed capacity [kW] | 15 | |
Heating capacity [kW] | 12.5 | |
Recommended fusing [A] | 32 | |
Electric connection | ||
Terminal connection | ||
Automatic dehumidification | ||
Non-stop dehumidification | ||
Dimensions | ||
Length (packaging excluded) [mm] | 1,348 | |
Width (packaging excluded) [mm] | 769 | |
Height (packaging excluded) [mm] | 1,323 | |
Weight | ||
(packaging excluded) [kg] | 230 |
Equipment, features and functions | ||
---|---|---|
Housing type | ||
Stainless steel | ||
Device version | ||
Indoor installation (standard) | ||
Hiring model | ||
stackable | ||
Shelter against the weather | ||
Equipment | ||
Wide-range voltage | ||
Rotor rotation control (rotor and drive) | ||
Overtemperature protection system with restart lock (regeneration air) | ||
Operating temperature management (regeneration air) | ||
Filter monitoring (per air current and collective warning light) | ||
Duoventic control | ||
Configurable air direction reversal (conversion requires minimal effort) | ||
Terminals for external ON/OFF | ||
Terminals hygrostat | ||
Potential-free contacts (operation, fault, filter) | ||
Operating hours counter | ||
Air volume regulation | ||
Integrated heat recovery | ||
Hygrostat (electronic) | ||
Hygrostat (mechanical) | ||
Moisture control | ||
Moisture and temperature registration | ||
Sensor-supported Flowmatic control | ||
Power meter | ||
Ammeter | ||
DIN socket for external ON/OFF | ||
Regeneration heating design | ||
Electric resistance | ||
Electric PTC | ||
Saturated vapour (4 bar) | ||
Gas | ||
Air pre- and post-treatment | ||
Pre-cooling | ||
After-cooling | ||
Pre-heating | ||
After-heating | ||
Mobility | ||
Transport frame | ||
Swivel casters with brake | ||
Trestle rollers/ fixed castors | ||
Crane lifting gear | ||
Forklift pockets |
standard equipment
optionally available
not available

Bedienungsanleitung Adsorptionsluftentfeuchter TTR 2000 / TTR 2800 / TTR3700 (INT)
TRT-BA-TTR2000-TTR2800-TTR3700-TC-001-INT.pdf (4.0 MB)
Der Adsorptionstrockner TTR 2000 ist ein professioneller Luftentfeuchter „made in Germany" für hohe Entfeuchtung auch bei niedrigem Taupunkt