Submerged Waste Water Pump TWP 7025 E
Availability: Immediately available
Submerged Waste water pump TWP 7025 E
Handles even high feed rates with power and reliability
The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour.
A remarkable pump capacity – from 7 metres down to 35 mm
The thoroughly robust submerged pump is accommodated in a watertight encapsulated and impact-resistant plastic housing and is suitable for underwater application to an immersion depth of 7 metres. The pump can start operation as of a minimum operating depth of 115 mm. Once switched on, the device pumps off the waste water until reaching a residual water level of 35 mm. Besides water withdrawal for operating a garden irrigation system, water removal after flooding and other fields of application involving contaminated water, the TWP 7025 E is also suited for transporting clear water.
Above that, the compactly designed TWP 7025 E is perfectly equipped for long-term applications, for the pump comes with both a maintenance-free motor and an integrated thermal protection circuit. Furthermore, the high-quality ceramic face seal and a low-wear shaft ensure extreme durability.
Whether in automatic or manual mode – the TWP 7025 E always guarantees optimal handling
Due to its steplessly lockable float switch, the TWP 7025 E allows you to choose between automatic mode and manual continuous operation. In automatic mode, the device is switched on or off depending on the preselected water level, while the dry run protection stops pump operation automatically if the water level drops too low. If, however, the float switch is locked horizontally in the position for permanent operation, the device will operate in continuous mode.
The flexible elbow, which can be set to various positions as required to allow for hoses and pipes to run parallel to the ground, is fitted with universal connections for 25 mm and 32 mm inner diameters as well as with 1" and 1½" threaded connections. A stable, ergonomic carrying handle additionally facilitates the handling of the powerful submerged waste water pump and can also be used for suspending the device at the supplied nylon cord. Thanks to the 10 metre connecting cable the pump can be quickly installed, and using the suspension cord it can be easily lowered into even great depths and raised again when required.
Brand quality plus cost-efficiency
Reliable, powerful and suited for the most challenging fields of application: those are some of the quality features of Trotec's submerged waste water pumps. Thanks to their high capacity they are able to withstand the most extreme conditions. HighPerformance for demanding applications – after all, Trotec stands for brand quality and professional solutions with an excellent value-for-money ratio!
Practical benefits:
- Powerful 750 watts of power for pumping up to 13,000 litres per hour from a depth of 9 m
- Ideally suited for water withdrawal as well as for recirculation and suction of water e.g. for swimming pools, basements, rain barrels, garden ponds, small building pits, flooding
- For effortless pumping of clear and waste water containing dirt and suspended particles sized up to 25 mm
- Extremely durable due to ceramic face seal
- Maintenance-free motor with integrated thermal protection circuit activated by overheating of the device
- Automatic switch-on/-off due to steplessly adjustable float switch
- Dry run protection during automatic operation
- Fixing option for the float switch during automatic operation
- IPX8 type of protection – protected against the ingress of water upon immersion
- Universal connection for flexible coupling
- Large ergonomic carrying handle – suitable for fastening the lowering cable
Technical details:
- Förderleistung max.: 13.000 l/h
- Körnung: 25 mm
- Förderhöhe max.: 9 m
- Eintauchtiefe max.: 7 m
- Mindestarbeitstiefe: 115 mm
- Höhe Einschaltpunkt: 500 mm
- Höhe Ausschaltpunkt: 250 mm
- Wasserstand Absaughöhe max.: 35 mm
- Wassertemperatutr max.: 35 °C
- Schutzart: IPX8
- Schutzklasse: I
- Anschlussspannung: 230 - 240V (50Hz)
- Leistungsaufnahme: 0,75 kW
- Anschlussstecker: CEE 7/4 (Schuko Stecker Typ F)
- Kabellänge: 10 m
- Abmessungen (L x B X H):160 X 160 X 355 mm
- Gewicht: 5,2 kg
- Max. conveying capacity: 13,000 l / h
- Grain size: 25 mm
- Delivery head max.: 9 m
- Immersion depth max.: 7 m
- Minimum operating depth: 115 mm
- Height of switch-on point: 500 mm
- Height switch-off point: 250 mm
- Water level extraction height max.: 35 mm
- Water temperature max.: 35 ° C
- Type of protection: IPX8
- Protection class: I
- Connection voltage: 230 - 240V (50Hz)
- Power consumption: 0.75 kW
- Connection plug: CEE 7/4 (Schuko plug type F)
- Cable length: 10 m
- Dimensions (L x W X H): 160 X 160 X 355 mm
- Weight: 5,2 kg
The immersion pump TWP 7025 E is available as a complete set with reducer adapter, angle adapter, 12 m long nylon cord and 10 m long power cord. Tubes or pipes with 25/32 mm internal diameter and 1 "/ 1½" threaded connections can be flexibly connected to the pump.
Technical data | ||
---|---|---|
General information | ||
Article number | 4.610.000.055 | |
Electrical values | ||
Mains connection | 230 - 240 V/50 Hz | |
Power input [kW] | 0.75 | |
Electric connection | ||
Connection plug | CEE 7/4 (Schuko plug type F) | |
Cable length [m] | 10 | |
Performance data | ||
Max. conveying capacity [l/h] | 13,000 | |
Grit of pump [mm] | 25 | |
Max. delivery head [m] | 9 | |
Max. submersion depth [m] | 7 | |
Minimum operating depth [mm] | 115 | |
Max. water level after suction [mm] | 35 | |
Max. water temperature [°C] | 35 | |
Safety feature | ||
Type of protection | IPX8 | |
Protection class | I | |
Functions and features | ||
On/off switch (float switch) | Automatic | |
Switch-on point float switch [mm] | 500 | |
Switch-off point float switch [mm] | 250 | |
Thermal overload protection | ||
Backflow preventer | ||
Stainless steel screws | ||
Suitable for both permanent operation (>10h) or salt-water operation | ||
Housing design | ||
Plastics | ||
Aluminium | ||
Stainless steel | ||
Steel | ||
Accessories scope of delivery | ||
Adapter | ||
Hose connection (inner diameter) | 25 / 32 mm | |
Threaded connection | 1" , 1 ½" | |
Backflow preventer | ||
Dimensions | ||
Length (packaging excluded) [mm] | 220 | |
Width (packaging excluded) [mm] | 160 | |
Height (packaging excluded) [mm] | 355 | |
Weight | ||
(packaging excluded) [kg] | 5.2 |
standard equipment
optionally available
not available

Konformitätserklärung Schmutzwasser-Tauchpumpen TWP 4025 E (DE)
TRT-CE-TWP4025E-HS-001-DE.pdf (166 KB)

Konformitätserklärung Schmutzwasser-Tauchpumpen TWP 4025 E (INT)
TRT-CE-TWP4025E-HS-001-EN.pdf (166 KB)

Konformitätserklärung Schmutzwasser-Tauchpumpen TWP 7025 E (DE)
TRT-CE-TWP7025E-HS-001-DE.pdf (166 KB)

Konformitätserklärung Schmutzwasser-Tauchpumpen TWP 7025 E (INT)
TRT-CE-TWP7025E-HS-001-EN.pdf (166 KB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (DA)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-DA.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (DE)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-DE.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (EN)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-EN.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (ES)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-ES.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (FR)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-FR.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (HU)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-HU.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E (IT)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-IT.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (NL)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-NL.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (PL)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-PL.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E / TWP 11025 (PT)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-PT.pdf (2.3 MB)

Bedienungsanleitung Schmutzwasser-Tauchpumpen TWP 4025 E / TWP 7025 E (TR)
TRT-BA-TWP4025E-TWP7025E-TWP11025E-TC-002-TR.pdf (2.3 MB)
Die Schmutzwasser-Tauchpumpe TWP 7025 E von Trotec transportiert stündlich bis zu 13.000 Liter verunreinigtes Wasser. Jetzt mehr erfahren!



