Register & Save!
Availability: Only few in stock
Air purifier TAC 5000
The air cleaners of the TAC series are optimal solutions for air extraction and cleaning of polluted work areas. The maximum emitted air volume is 4,500 m³/h.
Thanks to the modular and flexibly combinable filter modules of the TAC air purifiers, the optimum filter combination can be put together for any room air pollution level - and thanks to the Vario-Shift function, also with a HEPA filter that can be placed variably at the end for clean room environments.
The TAC 5000 air purifier, like the TAC 6500, is one of the world's first mobile air purifiers with FlowMatic technology!
The sensor-based Flowmatic control of these TAC units is unique in the world and works in principle like the "cruise control" in a passenger car:
Advantages in practice:
Filtration spectrum:
Typical areas of application:
Technical details of the air purifier TAC 5000:
Attention. Only use original replacement filters from Trotec. Only these are suitably designed and tested for your device. Cheap imitations usually do not achieve the specified filter values or guarantee the air volumes for which your device is designed. Thus, your device may be damaged and, depending on the area of application, there may be a health hazard for those who are in the rooms.
Nowadays, larger surfaces are usually applied with compressed air or airless systems. The paint mists that always occur in the process must be safely extracted. The paint mist filter is a helpful, quick solution for the flexible extraction of paint mist on site. Suitable for the TAC 5000 air purifier.
Dimensions: 496 x 496 x 96 mm
Typical coarse dust applications: Sawing & filing
Suitable for a filter area up to approx. 1.15 m²
In combination with a G4 Z-line filter, the F7 minipleat filter cassette is suitable for filtering fine dust.
Typical fine dust applications: Remediation work with materials containing minerals or glass wool.
Suitable for a filter area of up to approx. 8.50 m²
The H13 HEPA filter is suitable for filtering suspended particles in combination with the G4 Z-Line filter.
Typical HEPA applications: Sanding, asbestos or mold abatement, mineral dusts, etc.
In addition, the H13 HEPA filter - if connected downstream - can be used for hygienic areas!
Suitable for a filter area of up to approx. 18.00 m².
Dimensions: 510 x 510 x 292 mm
We recommend to use the air transport hoses of the SP-series only in combination with the corresponding connecting pieces!
Flexible connecting belts made of reinforced special fabric with automatic stop at the belt buckle. For fastening the hoses to the equipment nozzle or on the connecting sleeve.
standard equipment
optionally available
not available
TRT-CE-TAC5000_TAC6500-HS-001-DE.pdf (110 KB)
Herunterladen
TRT-CE-TAC5000_TAC6500-HS-001-EN.pdf (110 KB)
TRT-BA-TAC5000_6500-TC-001-DE.pdf (1.9 MB)
TRT-BA-TAC5000_6500-TC-001-EN.pdf (1.8 MB)
TRT-BA-TAC5000_6500-TC-001-FI.pdf (1.7 MB)
TRT-BA-TAC5000-6500-TC-001-FR.pdf (1.2 MB)