Register & Save!
Availability: Immediately available
PAGS 10-125 Angle Grinder + Diamond cutting disc set 110/115
The PAGS 10-125 angle grinder has a high stability thanks to its long-life gear head made of die-cast aluminum and ensures rapid working progress even at a constant speed of 5,000 - 12,000 rpm.
The stepless speed selection by means of adjusting wheel allows the user to adjust the performance of the device optimally to the respective material. In addition, the electronics continually regulate the set speed, so that even with increasing load the preselected speed is kept constant.
In addition, the angle grinder is equipped with a spindle lock, which makes a simple and quick tool change possible. For example, the grinding wheel can be exchanged simply by pressing the locking knob of the angle grinder.
In contrast to many other devices, the PAGS 10-125 also has a tool-free quick adjustment of the disk and brush protection, which makes it easy to work without problems at all angles.
The PAGS 10-125 angle grinder is designed for easy and secure handling thanks to the ergonomically optimized handle with rubber softgrip inserts. This means that the device is always secure in the hand, even during long working hours.
The auxiliary handle supports two-handed fatigue-free work and can be installed in three positions, in order to be horizontal or vertical, or to prepare the angle grinder for a left-handed person.
Benefits for practice:
The four-part accessories set for hand-held angle grinders consists of a continuous edge diamond cutting disc AD 110 DW, a segmented diamond cutting disc AD 115 DD and two turbo diamond cutting discs AD 115 DB:
Continuous edge diamond cutting disc AD 110 DW
This sintered diamond cutting disc with a continuous cutting edge of only 1.2 mm and a diameter of 110 mm impresses by producing clean cuts while running smoothly.
The 6 mm wide cutting segment of the AD 110 contains a high concentration of diamonds for a long lifetime and was specially designed for fine processing of fragile materials such as tiles, marble or ceramics by wet cutting.
1 disc included in the set
Segmented diamond cutting disc AD 115 DD
Thanks to narrow slots with slot holes, the 8 mm wide cutting segments of the AD 115 DD ensure both good heat resistance and material removal for fast dry cutting of concrete or roofing tiles as well as abrasive materials such as screed.
The sintered, segmented diamond cutting disc AD 115 DD has excellent universal characteristics, and its high concentration of diamonds guarantees a long lifetime.
1 disc included in the set
Turbo diamond cutting discs AD 115 DB
The AD 115 DB is our universal solution for wet and dry cutting of virtually all building materials. It combines high durability and performance for unproblematic cutting with neat results thanks to the 8 mm turbo cutting edge. The latter not only ensures clean cutting results but also effective cooling of the cutting disc.
For this reason you can use the AD 115 DB to economically process the most varied materials including concrete, brick, tiles, granite or other kinds of hard stone and fine stoneware, and cut them neatly with a cutting width of 1.2 mm without effort. The integrated cooling holes ensure good heat dissipation, smooth running and a reduced noise level.
2 discs included in the set
TRT-CE-PAGS10-125-HS-003-DE.pdf (108 KB)
TRT-CE-PAGS10-125-HS-003-EN.pdf (109 KB)
TRT-BA-PAGS10-125-TC-003-CS.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-DA.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-DE.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-EL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-EN.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-ES.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-ET.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-FI.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-FR.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-HR.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-HU.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-IT.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-LT.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-LV.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-NL.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-NO.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-PL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-PT.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-RO.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-RU.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SK.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SV.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-TR.pdf (2.1 MB)