PAGS 10-125 Angle Grinder + Cutting and roughing disc set (11-pieces)
Availability: Immediately available
PAGS 10-125 Angle Grinder + Cutting and roughing disc set (11-pieces)
The PAGS 10-125 angle grinder has a high stability thanks to its long-life gear head made of die-cast aluminum and ensures rapid working progress even at a constant speed of 5,000 - 12,000 rpm.
The stepless speed selection by means of adjusting wheel allows the user to adjust the performance of the device optimally to the respective material. In addition, the electronics continually regulate the set speed, so that even with increasing load the preselected speed is kept constant.
In addition, the angle grinder is equipped with a spindle lock, which makes a simple and quick tool change possible. For example, the grinding wheel can be exchanged simply by pressing the locking knob of the angle grinder.
In contrast to many other devices, the PAGS 10-125 also has a tool-free quick adjustment of the disk and brush protection, which makes it easy to work without problems at all angles.
The PAGS 10-125 angle grinder is designed for easy and secure handling thanks to the ergonomically optimized handle with rubber softgrip inserts. This means that the device is always secure in the hand, even during long working hours.
The auxiliary handle supports two-handed fatigue-free work and can be installed in three positions, in order to be horizontal or vertical, or to prepare the angle grinder for a left-handed person.
Benefits for practice:
- Powerful and durable 1,200 watt motor for fast and efficient continuous use
- Ideal for cutting, grinding and brushing metal, as well as for cutting tiles and concrete blocks
- Material-compatible work thanks to stepless speed selection via adjusting wheel
- Consistent high performance at a constant speed of 5,000 rpm to 12,000 rpm, even under load
- Durable and slim aluminum die-cast gearhead
- Low-vibration barrel for comfortable working
- Spindle locking allows easy change of the disc
- Toolless quick adjustment of the disk and brush protection
- On / off switch with switch-on lock
- Main and additional handle with rubberised softgrip inserts
- Additional handle can be installed in 3 positions
- Storage of the angle grinder in the case without prior disassembly of the disc
- Large action radius due to 3 m long and robust rubber cable
Technical details:
- Power consumption: 1,200 watts
- Rated voltage: 230 V
- Cable length: 3 m
- Rated rotational speed min .: 5.000 min-1
- Rated rotational speed max .: 12,000 min-1
- Grinding spindle thread: M14
- Protection class: IP20
- Protection class: II
- Disc size: 125 mm
- Sound pressure level: 91 dB (A)
- Sound power level: 102 dB (A)
- Uncertainty K: 3 dB
- Vibration emission value (ah) Main handle: 13.43 m / s²
- Uncertainty (K) Main handle: 1.5 m / s²
- Vibration emission value (ah) Additional handle: 9.77 m / s²
- Uncertainty (K) Additional handle: 1,5 m / s²
- No-load speed: 12,250 min-1
- Windshield speed: 80 m / s
- Diameter cutting disc: 125 mm
- Diameter of bore: 22.23 mm
- Cutting plate thickness: 3.2 mm
- Dimensions (L x W x H): 100 x 420 x 120 mm
- Weight: 2.5 kg
Reliable cutting and roughing discs are indispensable accessories for hand-held angle grinders. After all, the discs' maximum circumferential speed of 80 m/s corresponds to the speed of a racing car at 288 km/h. Therefore, put your trust in the safety provided by brand cutting discs of professional quality – for instance favourably calculated in a convenient complete set:
This 11-part accessories set can be used with all hand-held angle grinders and contains five metal cutting discs AD 125 M, five stone cutting discs AD 125 S and one metal roughing disc AD 125 MG – all of them of Trotec brand quality with an MPA test certificate:
Metal cutting disc AD 125 M
Thanks to grain size 36, hardness P and a cutting width of 3.2 mm for a longer lifetime and high resilience, this cutting disc is the ideal solution for economical cutting of metal and sheet metal.
The abrasive used on the AD 125 M is corundum specially suited for metal, which – being the fourth hardest mineral in the world – is characterized by an enormous toughness. This is why it is particularly well suited for high cutting performance.
5 discs included in the set
Stone cutting disc AD 125 S
The bonded silicon carbide abrasive on this disc has a high degree of thermal conductivity, which – combined with the material's hardness – makes silicon carbide abrasive grains the ideal abrasive for mineral materials.
For this reason the AD 125 S with grain size 30, hardness P and a cutting width of 3.2 mm for a longer lifetime is the ideal solution for fast cutting of concrete, natural stone, roofing tiles or sand lime bricks.
5 discs included in the set
Metal roughing disc AD 125 MG
This disc contains corundum bonded in multiple glass-fibre layers, which is specially suited for rough-grinding of metal. Corundum is extremely tough and therefore particularly well suited for high cutting performance with high grinding action.
With a thickness of 6 mm, grain size 30 and hardness P the AD 125 MG is a particularly efficient cutting accessory even at low contact pressure, and is ideally suited for economical processing of weld seams and surfaces.
1 disc included in the set'
All cutting and roughing discs in this set have a fibre-reinforced synthetic resin bonded fabric keeping the abrasive grains at an ideal distance from each other and thus guaranteeing best material properties for tough use and dry cutting at a high circumferential speed of up to 80 m/s.
Due to their depressed-centre design, the discs' structure is additionally reinforced, which contributes to an improved and stabilised guidance for clean cutting and grinding.
Practical benefits:
- Professional cutting discs in accordance with EN 12413
- Trotec brand quality with MPA test certificate (Materials Testing Office)
- Complete set for processing stone and metal
- High lifetime for effective, cost-saving working
- All cutting discs in depressed-centre design with fibre-reinforced synthetic resin bonded fabric (BF) for a high degree of stability
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.440.000.005 | |
| Technical data | ||
| Rated speed | 5.000 - 12.000 min-1 | |
| Spindle thread | M14 | |
| Type of protection | IP20 | |
| Protection class | II | |
| Disc size [mm] | 125 | |
| Electrical values | ||
| Power input [W] | 1,200 | |
| Mains connection | 230 V, 50 Hz | |
| Connection plug | CEE 7/17 | |
| Cable length [m] | 3 | |
| Sound values according to EN 60745 | ||
| Sound pressure level [dB(A)] | 91 | |
| Sound power level [dB(A)] | 102 | |
| Uncertainty K [dB] | 3 | |
| Vibration information according to EN 60745 | ||
| Vibration emission value (ah) Main handle [m/s²] | 13.43 | |
| Uncertainty (K) Main handle [m/s²] | 1.5 | |
| Vibration emission value (ah) Additional handle [m/s²] | 9.77 | |
| Uncertainty (K) Additional handle [m/s²] | 1.5 | |
| Data cutting disc | ||
| Idle speed [min-1] | 12,250 | |
| Max. disc speed [m/s] | 80 | |
| Cutting disc diameter [mm] | 125 | |
| Bore diameter [mm] | 22.23 | |
| Cutting disc thickness [mm] | 3.2 | |
| Functions and features | ||
| On/off switch with safety switch | ||
| Soft start | ||
| Spindle lock | ||
| Additional handle 3 mounting options | ||
| Infinitely variable speed control | ||
| Softgrip | ||
| Accessories scope of delivery | ||
| Cutting disc | ||
| Wrench | ||
| Pin-type face wrench | ||
| Protective cover | ||
| Additional handle | ||
| Transport case | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 100 | |
| Width (packaging excluded) [mm] | 420 | |
| Height (packaging excluded) [mm] | 120 | |
| Weight | ||
| (packaging excluded) [kg] | 2.5 | |
standard equipment
optionally available
not available
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 6.225.001.131 | |
standard equipment
optionally available
not available
Declaration of conformity for Angle grinder PAGS 10-125 (DE)
TRT-CE-PAGS10-125-HS-005-DE.pdf (108 KB)
Declaration of conformity for Angle grinder PAGS 10-125 (INT)
TRT-CE-PAGS10-125-HS-005-EN.pdf (108 KB)
Operating manual for Angle grinder PAGS 10-125 (CS)
TRT-BA-PAGS10-125-TC-009-CS.pdf (3.49 MB)
Operating manual for Angle grinder PAGS 10-125 (DA)
TRT-BA-PAGS10-125-TC-009-DA.pdf (3.39 MB)
Operating manual for Angle grinder PAGS 10-125 (DE)
TRT-BA-PAGS10-125-TC-009-DE.pdf (3.47 MB)
Operating manual for Angle grinder PAGS 10-125 (EL)
TRT-BA-PAGS10-125-TC-009-EL.pdf (3.15 MB)
Operating manual for Angle grinder PAGS 10-125 (EN)
TRT-BA-PAGS10-125-TC-009-EN.pdf (3.46 MB)
Operating manual for Angle grinder PAGS 10-125 (ES)
TRT-BA-PAGS10-125-TC-009-ES.pdf (3.50 MB)
Operating manual for Angle grinder PAGS 10-125 (ET)
TRT-BA-PAGS10-125-TC-009-ET.pdf (3.36 MB)
Operating manual for Angle grinder PAGS 10-125 (FI)
TRT-BA-PAGS10-125-TC-009-FI.pdf (3.48 MB)
Operating manual for Angle grinder PAGS 10-125 (FR)
TRT-BA-PAGS10-125-TC-009-FR.pdf (3.47 MB)
Operating manual for Angle grinder PAGS 10-125 (HR)
TRT-BA-PAGS10-125-TC-009-HR.pdf (3.36 MB)
Operating manual for Angle grinder PAGS 10-125 (HU)
TRT-BA-PAGS10-125-TC-009-HU.pdf (3.51 MB)
Operating manual for Angle grinder PAGS 10-125 (IT)
TRT-BA-PAGS10-125-TC-009-IT.pdf (3.28 MB)
Operating manual for Angle grinder PAGS 10-125 (LT)
TRT-BA-PAGS10-125-TC-009-LT.pdf (3.36 MB)
Operating manual for Angle grinder PAGS 10-125 (LV)
TRT-BA-PAGS10-125-TC-009-LV.pdf (3.44 MB)
Operating manual for Angle grinder PAGS 10-125 (NL)
TRT-BA-PAGS10-125-TC-009-NL.pdf (3.36 MB)
Operating manual for Angle grinder PAGS 10-125 (NO)
TRT-BA-PAGS10-125-TC-009-NO.pdf (3.35 MB)
Operating manual for Angle grinder PAGS 10-125 (PL)
TRT-BA-PAGS10-125-TC-009-PL.pdf (3.21 MB)
Operating manual for Angle grinder PAGS 10-125 (PT)
TRT-BA-PAGS10-125-TC-009-PT.pdf (3.51 MB)
Operating manual for Angle grinder PAGS 10-125 (RO)
TRT-BA-PAGS10-125-TC-009-RO.pdf (3.36 MB)
Operating manual for Angle grinder PAGS 10-125 (RU)
TRT-BA-PAGS10-125-TC-009-RU.pdf (3.31 MB)
Operating manual for Angle grinder PAGS 10-125 (SK)
TRT-BA-PAGS10-125-TC-009-SK.pdf (3.49 MB)
Operating manual for Angle grinder PAGS 10-125 (SL)
TRT-BA-PAGS10-125-TC-009-SL.pdf (3.49 MB)
Operating manual for Angle grinder PAGS 10-125 (SV)
TRT-BA-PAGS10-125-TC-009-SV.pdf (3.35 MB)
Operating manual for Angle grinder PAGS 10-125 (TR)
TRT-BA-PAGS10-125-TC-009-TR.pdf (3.49 MB)
