Register & Save!
Availability: Immediately available
PAGS 10-125 Angle Grinder + AD 125 S Stone cutting disc in a pack of 5
The PAGS 10-125 angle grinder has a high stability thanks to its long-life gear head made of die-cast aluminum and ensures rapid working progress even at a constant speed of 5,000 - 12,000 rpm.
The stepless speed selection by means of adjusting wheel allows the user to adjust the performance of the device optimally to the respective material. In addition, the electronics continually regulate the set speed, so that even with increasing load the preselected speed is kept constant.
In addition, the angle grinder is equipped with a spindle lock, which makes a simple and quick tool change possible. For example, the grinding wheel can be exchanged simply by pressing the locking knob of the angle grinder.
In contrast to many other devices, the PAGS 10-125 also has a tool-free quick adjustment of the disk and brush protection, which makes it easy to work without problems at all angles.
The PAGS 10-125 angle grinder is designed for easy and secure handling thanks to the ergonomically optimized handle with rubber softgrip inserts. This means that the device is always secure in the hand, even during long working hours.
The auxiliary handle supports two-handed fatigue-free work and can be installed in three positions, in order to be horizontal or vertical, or to prepare the angle grinder for a left-handed person.
Benefits for practice:
The AD 125 S is a powerful stone cutting disc of complying with EN 12413 and approved with an MPA test certificate. Thanks to grain size 30, hardness P and a cutting width of 2.5 mm, it is the ideal solution for quickly cutting concrete, natural stone, roofing tiles or sand lime bricks.
The bonded silicon carbide abrasive on the disc is similar to diamond grains in terms of its structure and characteristics. It is obtained from quartz sand and petroleum coke at more than 2,100 °C and has a high degree of thermal conductivity. This – combined with the material's hardness – is what makes silicon carbide abrasive grains the ideal abrasive for mineral materials.
The fibre-reinforced synthetic resin bonded fabric keeps the silicon carbide abrasive grains of the stone cutting disc AD 125 S at an ideal distance from each other and thus guarantees best material properties for tough use and dry cutting at a high circumferential speed of up to 80 m/s.
Due to the depressed-centre design of the AD 125 S, the disc's structure is additionally reinforced, which contributes to an improved and stabilised guidance for straight cuts.
TRT-CE-PAGS10-125-HS-003-DE.pdf (108 KB)
TRT-CE-PAGS10-125-HS-003-EN.pdf (109 KB)
TRT-BA-PAGS10-125-TC-003-CS.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-DA.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-DE.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-EL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-EN.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-ES.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-ET.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-FI.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-FR.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-HR.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-HU.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-IT.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-LT.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-LV.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-NL.pdf (3.3 MB)
TRT-BA-PAGS10-125-TC-003-NO.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-PL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-PT.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-RO.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-RU.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SK.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SL.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-SV.pdf (3.0 MB)
TRT-BA-PAGS10-125-TC-003-TR.pdf (2.1 MB)