Impact drill PHDS 10-230V + HSS Metal Drill Bit Set
Availability: Immediately available
The impact drill PHDS 10-230V + HSS Metal Drill Bit Set
The universal powerhouse for hammering, drilling and screwing
With the PHDS 10-230V, you benefit from a compact and powerful impact drill that allows you to flexibly carry out percussion drilling, drilling and screwdriving jobs in wood, concrete or steel with fast work progress.
If you value easy handling, professional features and strong drums with high drilling performance on impact drills, the PHDS 10-230V is the perfect tool for your needs.
Drilling has never been easier than it is with the PHDS 10-230V; because of its light weight and ergonomic compact design, the handling of this high quality impact drill is exceptionally comfortable and effortless.
This makes the PHDS 10230V the ideal entry-level model even for inexperienced users when working in home and garden - optimally as a helpful universal device for the first apartment reference.
The 650-watt motor of this hammer drill ensures fast work progress when drilling in wood up to 30 mm bore diameter, hammer drilling in masonry and concrete up to 13 mm in diameter or in the creation of up to 10 mm wide boreholes in metal. An included, adjustable drilling depth stop made of metal allows exactly repeatable drilling depths.
Comfortable drilling made easy
The PHDS 10-230V quick-release chuck with spindle lock ensures rapid replacement of your screwdriving or drilling attachments and the easy-to-change directional switch for right-and-left rotation facilitates quick change-in and unscrewing. All commercially available drills or screwdriver bits up to a shaft diameter of 13 mm can be clamped.
The 650-watt impact drill PHDS 10-230V can be controlled intuitively by increasing the pressure on the start button: Low pressure, low power - fully pushed, full power - very easy! In addition, the device is equipped with a speed limiter for material-specific working, which is integrated as a setting wheel access-friendly directly into the start button.
Thanks to the speed limitation, finely dosed working is possible at any time, for example when drilling smooth surfaces and screwing in screws. With this control electronics, you can fine-tune the maximum speed for material, material thickness and intended use - even in continuous operation, which can be easily activated via the lock button key.
In terms of handling, the pistol grip offers you several stop positions: In addition to the classic stance at the bottom of the ergonomically designed rubber-coated handle and also upwards with thumb and forefinger in the designated softgrip zone with recessed grips. For secure two-hand guidance, the supplied second handle can also be attached to the PHDS 10-230V. This can be rotated arbitrarily by 360 ° and fixed against rotation- An equally optimal solution for right and left-handers.
Benefits for the practice:
- Powerful 650 watt motor for fast work progress
- Universally applicable for masonry, concrete, wood or metal
- Start button for stepless speed control
- Pre-selectable speed limitation for material-appropriate working
- Function selector switch for screwdriving / drilling and impact drilling
- Integrated button for continuous operation
- Keyless chuck with spindle lock
- Infinitely adjustable drilling depth stop in robust metal design
- Convenient right-left run switching
- Rubberized softgrip inserts in the case for extra grip
- Removable auxiliary handle with 360 ° swivel function
Technical specifications:
- Number of gears: 2
- Idling speed: 50 - 3,000 min-1
- Beat frequency: 800 - 48,000 min-1
- Torque max .: 7.5 Nm
- Tool holder: quick-action chuck
- Chuck clamping range max .: 13 mm
- maximum drilling diameter wood: 30 mm
- maximum drill diameter metal: 10 mm
- maximum drilling diameter brick / brick: 13 mm
- Power supply: 230V / 50Hz
- Cable length (m): 3
- Protection class: II
- Power consumption: 650 W
- Sound pressure level: 94.58 dB (A)
- Sound power level: 105.58 dB
- Impact drilling in masonry with main handle (ah): 21.795 m / s²
- Uncertainty (K): 1.5 m / s²
- Impact drilling in masonry with additional handle (ah): 12,605 m / s²
- Uncertainty (K): 1.5 m / s²
- Drilling in metal with main handle (ah): 4.041 m / s²
- Uncertainty (K): 1.5 m / s²
- Drilling in metal with additional handle (ah): 2,713 m / s²
- Uncertainty (K): 1.5 m / s²
- Dimensions L x W x H: 60 x 300 x 200 mm
- Weight: 2 kg
HSS Metal Drill Bit Set
Whether alloyed or carbon steel, iron, copper, zinc sheet, gunmetal or bronze - with this 15 piece metal drill bit set you have all the spiral drill bits you need to drill in the most different metals and hard plastics or plexiglass. Thanks to a cylindrical shaft, they are also suited with all common drills and cordless drills.
The double-edged, two spiral metal drill bit is made of high speed steel with titanium nitride coating, has a maximum hardness of 67 HRC and is made with 135-degree cross-hatch to DIN 1412C.
As a result, these durable drill bits are perfectly suited for processing extremely hard materials and allow simultaneously, a significantly faster drilling at 118°, than comparable drill bits without cross-hatch and TiN coating. Drilling and blind hole depths up to five times drill diameter are no problem with these professional HSS drills.
The metal drill bit set contains all drill sizes in increments from 1.5 to 10 mm diameter, –at 2.5 mm multiples. For good readability of features, even after repeated use, each drill bit is also punched with a measurement mark in the shaft.
The complete set comes in a sturdy plastic box, which enables easy transport and hanging on a wall. All drills bits are safely fixed in a pre-sorted position and can be easily taken out of the box as a result of a tilting bracket.
Benefits in practice:
- Complete set in Trotec brand quality
- 15 spiral drill bits made of durable, high-strength carbon steel
- Can be used with drills of all brands
- 135 degree drill bit with cross-hatch to DIN 1412 C - max. Hardness 67 HRC
- High wear resistance and service life
- Universally applicable for drilling in iron, steel, non-ferrous metals (not suitable for use with aluminum), cast iron and hard plastics
- Many application options by partial intermediate sizes
- Delivered in practical storage box with integrated hook for wall mounting when not in use
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.415.000.010 | |
| Technical data | ||
| Idle speed 1. Speed level | 50 - 3.000 min-1 | |
| Impact frequency combined 1. Speed level | 800 - 48.000 min-1 | |
| Max. torque (decimal digit) [Nm] | 7.5 | |
| Tool holder | Quick-release chuck | |
| Max. chucking range [mm] | 13 | |
| Maximum drilling diameter | ||
| Wood [mm] | 30 | |
| Metal [mm] | 10 | |
| Masonry / bricks [mm] | 13 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Power input [W] | 650 | |
| Connection plug | CEE 7/17 | |
| Cable length [m] | 3 | |
| Protection class | II | |
| Sound values according to EN 62841 | ||
| Sound pressure level [dB(A)] | 95 | |
| Sound power level [dB(A)] | 106 | |
| Uncertainty K [dB] | 5 | |
| Vibration information according to EN 62841 | ||
| Vibration emission value (ah) Impact drilling in brickwork with main handle [m/s²] | 21.795 | |
| Uncertainty (K) Impact drilling in brickwork with main handle [m/s²] | 1.5 | |
| Vibration emission value (ah) Impact drilling in brickwork with additional handle [m/s²] | 12.605 | |
| Uncertainty (K) Impact drilling in brickwork with additional handle [m/s²] | 1.5 | |
| Vibration emission value (ah) Drilling in metal with main handle [m/s²] | 4.041 | |
| Uncertainty (K) Drilling in metal with main handle [m/s²] | 1.5 | |
| Vibration emission value (ah) Drilling in metal with additional handle [m/s²] | 2.713 | |
| Uncertainty (K) Drilling in metal with additional handle [m/s²] | 1.5 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 200 | |
| Width (packaging excluded) [mm] | 60 | |
| Height (packaging excluded) [mm] | 300 | |
| Weight | ||
| (packaging excluded) [kg] | 2 | |
| Equipment, features and functions | ||
|---|---|---|
| Functions and features | ||
| Infinitely variable speed control | ||
| Clockwise / counter-clockwise rotation | ||
| Function selector switch | ||
| Automatic SPINDLE LOCK | ||
| Continuous operation | ||
| Tool-free exchange of accessories | ||
| SPINDLE LOCK button | ||
| Venting slots | ||
| Integrated LED work lamp | ||
| Integrated bit magazine | ||
| Softgrip | ||
| Belt clip | ||
| Standard scope of delivery | ||
|---|---|---|
| Accessories scope of delivery | ||
| Number of drills | 3 drill bits (5 x 85 mm, 6 x 100 mm, 8 x 120 mm) | |
| Additional handle | ||
| Additional handle (can be rotated by 360°) | ||
| Depth stop | ||
| Transport case | ||
standard equipment
optionally available
not available
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 6.200.001.131 | |
standard equipment
optionally available
not available
PHDS 10-230V
Konformitätserklärung Schlagbohrmaschine PHDS 10-230V (DE)
TRT-CE-PHDS10-230V-HS-002-DE.pdf (167 KB)
Konformitätserklärung Schlagbohrmaschine PHDS 10-230V (INT)
TRT-CE-PHDS10-230V-HS-002-EN.pdf (167 KB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (CS)
TRT-BA-PHDS10-230V-TC-002-CS.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (DA)
TRT-BA-PHDS10-230V-TC-002-DA.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (DE)
TRT-BA-PHDS10-230V-TC-004-DE.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (EL)
TRT-BA-PHDS10-230V-TC-001-EL.pdf (3.7 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (EN)
TRT-BA-PHDS10-230V-TC-004-EN.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (ES)
TRT-BA-PHDS10-230V-TC-002-ES.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (FI)
TRT-BA-PHDS10-230V-TC-002-FI.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (FR)
TRT-BA-PHDS10-230V-TC-004-FR.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (HR)
TRT-BA-PHDS10-230V-TC-001-HR.pdf (3.7 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (HU)
TRT-BA-PHDS10-230V-TC-002-HU.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (IT)
TRT-BA-PHDS10-230V-TC-002-IT.pdf (1.7 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (LT)
TRT-BA-PHDS10-230V-TC-002-LT.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (LV)
TRT-BA-PHDS10-230V-TC-002-LV.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (NL)
TRT-BA-PHDS10-230V-TC-002-NL.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (NO)
TRT-BA-PHDS10-230V-TC-002-NO.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (PL)
TRT-BA-PHDS10-230V-TC-002-PL.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (PT)
TRT-BA-PHDS10-230V-TC-002-PT.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (RO)
TRT-BA-PHDS10-230V-TC-002-RO.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (RU)
TRT-BA-PHDS10-230V-TC-002-RU.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (SV)
TRT-BA-PHDS10-230V-TC-002-SV.pdf (3.6 MB)
Bedienungsanleitung Schlagbohrmaschine PHDS 10-230V (TR)
TRT-BA-PHDS10-230V-TC-002-TR.pdf (1.7 MB)
