IDS 100 High Output Indirect Heater
Availability: Currently not in stock
IDS 100 High Output Indirect Heater
The sturdy indirect oil heating units in the IDS Series have everything they need to provide you with a super-fast and economic heating.
Frequently bought together
Total
Professional oil heater fan IDS 100 for clean heat on site
With a nominal heat output of 117 kW and an air volume of 5,500 m³/h, this professional oil fan heater enables quick and effective heating in storage and production halls, workshops, greenhouses and on construction sites. The integrated oil burner with Suntek pump ensures reliable continuous operation of the IDS 100.
The chimney oil heater manufactured in Europe impresses with its reliable operation, low maintenance and high level of safety. The double-walled and protectively coated housing reduces the surface temperature of the outer shell to a minimum, which means a lower risk of injury for the user. In addition, the housing offers optimal sound insulation. The device is equipped with an electronic flame arrester, safety thermostat to protect against overheating and fully automatic after-cooling.
Despite a weight of 149 kilograms, the chassis construction with large wheels allows easy transport between the various locations. An air transport hose with a length of 7.6 meters can also be connected to the IDS 100 there, because a hose connector is already included in the standard scope of delivery. Optionally, if required, a two-way hose distributor can also be attached to the IDS 100.
IDS indirect oil heater fan - maximum heating power, clean warmth
The indirect oil heater fans of the IDS series are ideal for rooms where only limited ventilation is possible, but which should nevertheless be used by people and animals. They are also a good choice for accelerating the drying of buildings and in rooms where there is a risk of fire due to the presence of combustible materials.
In principle, the combustion process is the same as that of the IDS direct oil heater fan: The fuel is sucked out of the tank by a pump, brought to operating pressure, then sprayed into the combustion chamber as an air-fuel mixture via an atomizer nozzle and burned there. However, with indirect heaters, the air to be heated is completely separated from the combustion chamber.
In the case of indirect oil heater fans, the air intended for heating is sucked in by the same fan as is the combustion air, but is then routed separately past the enlarged surface of the combustion chamber, the heat exchanger, in order to be able to heat up without being mixed with the exhaust air . While the products of combustion are discharged to the outside through a chimney, 100% exhaust-free hot air escapes through the outlet opening of the indirect oil heater fan.
In order to gain clean and at the same time dry heat, the use of indirect oil heater fans is recommended. In contrast to direct heaters, neither combustion products nor released water vapor get into the room air, as long as a suitable exhaust gas discharge has been attached to the chimney of the device, which directs the exhaust gases outside of the room to be heated.
The IDS 100 offers a wide range of possible uses
The combination of mobile chassis design, integrated fuel tank and a maximum nominal heat output of 117 kW makes the indirect oil heater fan IDS 100 a versatile heating solution for a wide variety of applications, for example:
- Warming of workshops
- Heating of livestock stalls
- Temperature control of storage rooms
- Heating of construction site interiors
- Clean hot air for marquees or exhibition halls
- Warming of glass or foil greenhouses
For interior heating, the exhaust air from the oil heater can be removed from the room by attaching an exhaust pipe to the stainless steel chimney of the IDS 100 and leading it to the outside.
Instead of large-volume air heating, the IDS 100 oil fan heater also enables spot heating using a hot-air hose. The hose connector required for attachment is available as an optional accessory if required - also as a two-way hose distributor for simultaneous spot heating of two workstations. And for longer periods of continuous use, the IDS 100 can also be supplied with fuel from an external oil tank instead of from the integrated tank. The connection kit required for this is available as an optional accessory, as is an optional oil preheater.
Benefits in practice:
- Integrated oil burner with Suntek pump
- Electronic flame arrester
- Overheating thermostat
- Stainless steel combustion chamber heat exchanger
- Fully automatic post-cooling
- Double-walled housing for optimal soundproofing and insulation
- Integrated fuel tank
- Suitable for fully automatic use with an external thermostat or timer
- Oil preheating (optional)
- Connection option for air transport hose
Optional accessories:
- Connection kit for external oil tank (on request)
- Oil preheating (on request)
- Hose connector Two-way hose distributor (on request)
- External thermostat for fully automatic use
- Tank level indicator (on request)
- Filler neck oil filter (on request)
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 1.430.000.140 | |
| Functional principle | ||
| Oil | ||
| Method of heating indirect | ||
| Air flow rate | ||
| Level Max. [m³/h] | 5,550 | |
| Fan | ||
| axial | ||
| Nominal heat input | ||
| Level Max. [kW] | 117.26 | |
| Nominal heat output | ||
| Level Max. [kW] | 117 | |
| Level Max. [kcal] | 90,748 | |
| Temperature increase | ||
| Level Max. [°C] | 75 | |
| Electrical values | ||
| Mains connection | 230 V, 50 Hz | |
| Current consumption [A] | 8.35 | |
| Power input [kW] | 1.82 | |
| Heating capacity [kW] | 117 | |
| Electric connection | ||
| Connection plug | CEE 7/7 | |
| Cable length [m] | 1.5 | |
| Operation | ||
| Connection for external thermostat | ||
| Fuel feed | ||
| Fuel feed | Suntec pump | |
| Fuel filter | ||
| Available | ||
| Oil consumption | ||
| Level Max. [l/h] | 10.79 | |
| Kraftstofftank | ||
| Content [l] | 135 | |
| Metall | ||
| Hose connection | ||
| Diameter | Hose connection [mm] | 500 | |
| Chimney connection | ||
| Available | ||
| Diameter | Chimney connection [mm] | 150 | |
| Sound values | ||
| Distance 1 m [dB(A)] | 76 | |
| Suitable fuels | ||
| Kerosene | ||
| Diesel | ||
| EL fuel oil | ||
| Low-sulphur EL fuel oil | ||
| Dimensions | ||
| Length (packaging excluded) [mm] | 1,870 | |
| Width (packaging excluded) [mm] | 660 | |
| Height (packaging excluded) [mm] | 1,210 | |
| Weight | ||
| (packaging excluded) [kg] | 149 | |
| Equipment, features and functions | ||
|---|---|---|
| Mobility | ||
| Carry/transport handle(s) | ||
| Wheels | ||
| Housing design | ||
| Steel | ||
| Safety feature | ||
| Overheating protection | ||
| IPX4 | ||
standard equipment
optionally available
not available
Ratgeber Praxiswissen Profi-Beheizung (DE)
TRT-Ratgeber-Profi-Beheizung-HS-DE.pdf (3.98 MB)
