Register & Save!
Availability: Immediately available
Cutting and roughing disc set
Eleven discs in a special offer pack – our pro selection for economical cutting, grinding or deburring
Reliable cutting and roughing discs are indispensable accessories for hand-held angle grinders. After all, the discs' maximum circumferential speed of 80 m/s corresponds to the speed of a racing car at 288 km/h. Therefore, put your trust in the safety provided by brand cutting discs of professional quality – for instance favourably calculated in a convenient complete set:
This 11-part accessories set can be used with all hand-held angle grinders and contains five metal cutting discs AD 125 M, five stone cutting discs AD 125 S and one metal roughing disc AD 125 MG – all of them of Trotec brand quality with an MPA test certificate:
Metal cutting disc AD 125 M
Thanks to grain size 36, hardness P and a cutting width of 3.2 mm for a longer lifetime and high resilience, this cutting disc is the ideal solution for economical cutting of metal and sheet metal.
The abrasive used on the AD 125 M is corundum specially suited for metal, which – being the fourth hardest mineral in the world – is characterized by an enormous toughness. This is why it is particularly well suited for high cutting performance.
5 discs included in the set
Stone cutting disc AD 125 S
The bonded silicon carbide abrasive on this disc has a high degree of thermal conductivity, which – combined with the material's hardness – makes silicon carbide abrasive grains the ideal abrasive for mineral materials.
For this reason the AD 125 S with grain size 30, hardness P and a cutting width of 3.2 mm for a longer lifetime is the ideal solution for fast cutting of concrete, natural stone, roofing tiles or sand lime bricks.
5 discs included in the set
Metal roughing disc AD 125 MG
This disc contains corundum bonded in multiple glass-fibre layers, which is specially suited for rough-grinding of metal. Corundum is extremely tough and therefore particularly well suited for high cutting performance with high grinding action.
With a thickness of 6 mm, grain size 30 and hardness P the AD 125 MG is a particularly efficient cutting accessory even at low contact pressure, and is ideally suited for economical processing of weld seams and surfaces.
1 disc included in the set'
All cutting and roughing discs in this set have a fibre-reinforced synthetic resin bonded fabric keeping the abrasive grains at an ideal distance from each other and thus guaranteeing best material properties for tough use and dry cutting at a high circumferential speed of up to 80 m/s.
Due to their depressed-centre design, the discs' structure is additionally reinforced, which contributes to an improved and stabilised guidance for clean cutting and grinding.
Trenn- und Schruppscheiben-Set nach EN 12413 für Stein und Metall in Trotec-Markenqualität