BP25 Pyrometer-Dew Point Scanner

Pyrometer dew point scanner BP25

4-in-1 infrared combination instrument for mould prevention: Surface temperature, air temperature and humidity measurement with automatic dew point alarm

Quick and easy dew point determination

Rely on the BP25 from Trotec, which was tested by the consumer portal VERGLEICH.ORG and won the prize for best price-performance ratio!
If moisture often forms in the same place, it doesn't take long for mould to develop. Whether in private or commercial use - the high-quality BP25 pyrometer dew point scanner gives you the opportunity to check surfaces such as interior walls and facades for potential mould hazards caused by cold spots. You can quickly and easily measure wall surface temperatures contactlessly via infrared and at the same time automatically determine the dew point temperature value. On the backlit LCD display, the measured values can be clearly and easily read, even in unfavourable lighting conditions. With the help of the integrated 20:1 dual laser, the measuring spot on the respective measured material is displayed.
To determine the dew point, the device also measures the current room temperature and the moisture content of the air. Thanks to its acoustic and visual alarm function based on the traffic light principle and the integrated bar graph indicator, the BP25 offers you quick orientation even with larger measuring surfaces, whether the dew point has been reached or not at a measuring point and whether there is a possible danger of mould due to condensation. Since a long-term increase in relative humidity of approx. 70% is sufficient for mould to develop on material surfaces, the BP25 warns you acoustically and visually a few degrees before the actual dew point is reached. It is therefore worthwhile using the BP25 to check cold wall areas at an early stage to detect the formation of condensation.

With 20:1 optics the measuring spot always in view

With the infrared pyrometer BP25 you can measure the surface temperature of walls, materials and objects without contact, i.e. without touching the measured material. To be able to estimate the exact range of the measurement (measuring spot), the BP25 has a dual laser pointer. This projects two laser dots onto the surface to be measured, which precisely mark the diameter of the measuring spot. In this area the temperature value is recorded by an infrared sensor and an average value is calculated. The following applies: the smaller the measuring spot, the more accurate the measurement, and the further away the measuring device is from the measuring object, the larger the measuring spot diameter. Thanks to its geometric resolution of 20:1, the hand-held meter allows you to take accurate measurements even from a distance of several meters.