BE15 Voltage Detector
Availability: Immediately available
BE15 Voltage Detector
The BE15 is a non-contact phase tester, which enables not only the quick localisation of line breakage in open cables (for example by cable drums or lights) but also detects live conductors such as sockets, switch or cable connections.
Frequently bought together
Total
Voltage detector for the contactless and fast localization of live conductors in cable connections, sockets, switches, etc
The capacitive measuring method allows contact-free voltage measuring to be carried out quickly and easily.
The red LED glow lamp starts to pulsate as soon as the measuring tip detects voltage in the localisation area and this is accompanied by an acoustic alarm.
In addition, the sensitivity can be reduced to up to 24 volts.
Benefits in practice:
- Fast and non-contact detection of AC voltages
- Multi-colored LED indicator integrated in the measuring tip [green: OK, red: ATTENTION! Voltage!, orange (instead of green): Switching to higher sensitivity (24 V) active]
- Two different sensitivity levels selectable (200 V, 24 V)
- Visual and audible alarm when power is applied
- On / off switch for completely deactivating the device when not in use (energy-saving mode)
- Compact stylus design with pocket clip
- Integrated LED light for working under unfavorable lighting conditions
- Optimal price-performance ratio
Practical detail: On the clip side of the BE15, a high-performance LED flashlight is integrated, with which even dark measuring point areas can be optimally illuminated.
The BE15 should be included in the basic test kit of all home and craftsmen who carry out work on live installations.
Here are some technical details of the BE15:
- Measuring circuit category: CAT III 1000 V / CAT IV 600 V
- Measuring range UAC: 24 to 1,000 V
- Micro-environment: Pollution degree 2
- Type of test: single-pole, contactless
- Voltage display: LED
- Functions: visual and acoustic continuity display, integrated flashlight for measuring point illumination
- Safety: EN 61326, EN 61010-1, EN 61010-02-033
- Power supply: 2 x 1.5V, IEC LR03 (AAA)
- Operating temperature min. 0 ° C to + 40 ° C
- Max. Humidity range 80% R.F.
- Storage conditions: -10 ° C to 60 ° C
- Storage humudity: <80% RH
- Dimensions: 158 x 21 x 25 mm
- Weight: 48 g (including batteries)
- Supplied with: measuring device, batteries, operating instructions
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 3.510.205.216 | |
| AC voltage [V/AC] | ||
| Min. measuring range | AC voltage [V] | 24 | |
| Max. measuring range | AC voltage [V] | 1,000 | |
| Housing design | ||
| Plastics | ||
| Measuring category | ||
| CAT III (1,000 V) | ||
| CAT IV (600 V) | ||
| Safety | ||
| EN 61.326 | ||
| EN 61010-1 | ||
| EN 61010-2-033 | ||
| Degree of pollution 2 | ||
| Power supply | ||
| Internal (battery) | ||
| Battery type | 2 x 1.5 V, AAA | |
| Ambient conditions | ||
| Operation - min. temperature [°C] | 0 | |
| Operation - max. temperature [°C] | 40 | |
| Max. humidity range [% r.F.] | 80 | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 158 | |
| Width (packaging excluded) [mm] | 21 | |
| Height (packaging excluded) [mm] | 25 | |
| Weight | ||
| (packaging excluded) [kg] | 0.048 | |
| Standard scope of delivery | ||
|---|---|---|
| Standard scope of delivery | ||
| Measuring device | ||
| Battery(-ies) | ||
| Operating manual | ||
| Transport bag | ||
| One pair of measuring cables (banana) | ||
| Contact temperature sensor type K | ||
| Ascertainable measured values and functions | ||
|---|---|---|
| Functions and features | ||
| Non-contact AC voltage detection (without galvanic contact) | ||
| Acoustic alarm | ||
| Visual alarm | ||
| Integrated torch | ||
| Continuity test | ||
| Diode testing | ||
| Measured value hold function | ||
| Maximal value display | ||
| Automatic measuring range selection | ||
| Display illumination | ||
| Automatic switch-off | ||
| Contact temperature measurement with type K contact sensor | ||
| Automatic battery test | ||
| Duty cycle | ||
| Acoustic continuity check | ||
| Visual continuity check | ||
| Polarity test | ||
| Phase sequence indicator | ||
| Unipolar phase testing | ||
| Integrated digital clock | ||
| Calendar function / date display | ||
| Programmable electricity tariffs | ||
| Consumption indication as active power in watts | ||
| Consumption indication as scale of charges in cents | ||
| Recording mode for long-term measurements | ||
standard equipment
optionally available
not available
Declaration of conformity for voltage detector BE15 (DE)
TRT-CE-BE15-HS-002-DE.pdf (110 KB)
Declaration of conformity for voltage detector BE15 (INT)
TRT-CE-BE15-HS-001-EN.pdf (110 KB)
