Battery work light PWLS 10-20V
Availability: Immediately available
The battery work light PWLS 10-20V
For flexible spot and area lighting. With 300 lumens. Without cable.
Whether in the workshop and garage, under the vehicle, in the cellar, on the store, new building or garden shed - there are numerous locations with a lot of action, but little light. There, the mobile workstation battery provides good lighting conditions and brings bright light into any darkness - even in hard-to-reach workplaces.
The versatile PWLS 10-20V is the perfect work light for all manual work and should not be missing in any household, because it can be used in any location - a socket is not needed.
The wireless operating of the PWLS 10-20V makes it possible to use its 20 V Flexpower multi-battery with 2 Ah charging capacity. This high-quality premium brand battery of the NMC type can not only be flexibly combined with other Trotec cordless tools - it also keeps its full power until the end as the discharge progresses.
That's why you can benefit from the consistently bright light of the work lamp PWLS 10-20V even with long work assignments - with 300 lumens of luminous flux with a lighting duration of more than 8 hours.
And if this performance alone is not enough for you, then the optionally available 4 Ah Flexpower multi-battery will allow you to use twice as long a lighting insert as the supplied Flexpower battery with 2 Ah.
As versatile as your requirements
Two stable and cleverly twisted joints are the reason why you can easily and quickly adjust the PWLS 10-20V to almost any illuminated position. While the 7-point tilting joint allows you to adjust the angle to 180 °, the work light can be rotated 270 ° via the pivot joint. Due to the adjustment combination of both joints, the light field can be aligned to any target position as needed.
For fatigue-free manual use, the PWLS 10-20V is not only equipped with an ergonomic handle, which is non-slip in the hand thanks to softgrip inserts, but can also be variably used as a floor lamp, horizontal or even as a suspended lamp-A hinged hook on the head end makes fast hanging easy.
In addition, a mountable belt clip is included as standard, which facilitates quick access when carrying the work light.
The PWLS 10-20V offers you obvious advantages
With the cordless work lamp PWLS 10-20V, you get practically two lamps in one. The integrated surface light in the form of high-intensity LED tube light guarantees brightly lit work areas with 300 lumens. In addition, another LED in the lamp head offers you the use as a fully fledged flashlight with 110 lux light intensity. This mode of operation is ideal for pinpoint illumination of confined areas. The change from surface-mounted to flashlight is carried out on the PLWS 10-20V with just one push of a button.
Flexible combination - with Flexpower
The PWLS 10-20V includes a 20V flexpower multi-battery. This enduring lithium-ion battery is part of the Trotec Flexpower system and also fits on to other 20V tools from the Trotec power tool range.
For extra-long workloads, the PWLS 10-20V can also be used with the optional 4-Ah Flexpower multi-battery, which allows twice as long lighting operations.
For all users who already own a 20 V Flexpower multi-battery, this work lamp in the PWLS 10 version is also available without a battery.
Benefits for the practice:
- 20 V lithium-ion battery without memory effect and without self-discharge
- Flexpower multi-battery 20V 2.0 Ah - flexibly combinable with other cordless tools
- Luminous head rotatable by 270 ° and vertically tiltable by 180 ° in 7 snap - in positions
- High-intensity LED tube light with integrated hand lamp
- Spot-accurate and area-wide illumination possible
- High power LED provides extra light with 300 lm
- LED in the lamp head as a flashlight function
- Fast charger with automatic charge shutdown: only 1 hour charge time
- Three-level battery capacity indicator integrated in the battery
- Rubberized softgrip inserts in the case for extra grip
- Integrated suspension hook allows easy hanging of the lamp
- Attachable belt clip facilitates quick access and transportation
Technical specifications:
- Battery voltage: 20V
- Battery capacity 2.0 Ah
- Battery charging time: 1.0 h
- Lighting duration:> 4 h
- Weight: 380 g
- Dot LED:
- Power consumption 3 W
- Luminous flux: 250 lm
- Light intensity: 110 lux
- Area LED:
- Power consumption: 3 W
- Luminous flux: 300 lm
- Light intensity: 11 lux
Scope of delivery:
- Belt clip
- Flexible suspension hook
- Fast charger
- Replaceable battery
Premium brand battery for permanent full power
The positive properties of lithium-ion batteries are obvious:
- No memory effect
- No self-discharge
- The battery can be removed from the charger at any time without damaging the battery
Nevertheless, there are serious differences in quality among different suppliers under the term "lithium-ion batteries". While some are using poor electrode materials, there are also batteries that are losing their performance with increasing discharge.
When you buy a device with a lithium-ion battery, Trotec guarantees the delivery of a high-quality premium brand battery of the type NMC with a high power density and charging voltage until the end. This is why, in contrast to conventional lithium-ion batteries, our premium brand battery does not have any decrease in power with increasing discharge. You will benefit from a permanent maximum force, even if the battery is almost completely empty.
As the service life progresses, only the state of charge drops here, but never the performance - this is your added value for premium brand batteries from Trotec!
| Technical data | ||
|---|---|---|
| General information | ||
| Article number | 4.455.000.110 | |
| Technical data | ||
| Colour temperature (K) | 6,200 | |
| Energy efficiency class | I | |
| Spotlight LED | ||
| Power input Spotlight LED [W] | 3 | |
| Luminous flux Spotlight LED [lm] | 250 | |
| Illuminance Spotlight LED [lux] | 110 | |
| Burn time Spotlight LED | 6 h | |
| Surface LED | ||
| Power input Surface LED [W] | 3 | |
| Luminous flux Surface LED [lm] | 300 | |
| Illuminance Surface LED [lux] | 11 | |
| Burn time Surface LED | 8 h | |
| Functions and features | ||
| ON/OFF switch | ||
| Lamp head, swivelling | 180° in 7 positions | |
| Lamp head, rotatable | 270° | |
| Softgrip | ||
| Flexible suspension hook | ||
| Wrist strap attachment | ||
| Belt clip | ||
| Flashing warning light | ||
| Mounting bracket | ||
| Brightness levels | 1 | |
| Stroboscope | ||
| Battery level indication | Available | |
| Changeable battery | ||
| Electrical values battery | ||
| Battery nominal voltage [V] | 20 | |
| Battery capacity [Ah] | 2 | |
| Capacity indication | 3-stage | |
| Battery type | Li-ion | |
| Battery charging time [h] | 1 | |
| Charger | ||
| Mains connection | 230 - 240 V, 50 Hz | |
| Output voltage [V] | 21.5 | |
| Power input [W] | 65 | |
| Nominal current consumption [mA] | 2,400 | |
| Connection plug | CEE 7/16 | |
| Cable length [m] | 1.5 | |
| Protection class | II | |
| Dimensions | ||
| Length (packaging excluded) [mm] | 85 | |
| Width (packaging excluded) [mm] | 70 | |
| Height (packaging excluded) [mm] | 175 | |
| Weight | ||
| (packaging excluded) [kg] | 0.38 | |
| Standard scope of delivery | ||
|---|---|---|
| Accessories scope of delivery | ||
| Number of batteries | 1 | |
| Quick charger | ||
standard equipment
optionally available
not available
Declaration of conformity cordless work light PWLS 10 / PWLS 10-20V (DE)
TRT-CE-PWLS10-PWLS10-20V-TC-002-DE.pdf (109 KB)
Declaration of conformity cordless work light PWLS 10 / PWLS 10-20V (INT)
TRT-CE-PWLS10-PWLS10-20V-TC-002-EN.pdf (109 KB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (CS)
TRT-BA-PWLS10-PWLS10-20V-TC-002-CS.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (DA)
TRT-BA-PWLS10-PWLS10-20V-TC-002-DA.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (DE)
TRT-BA-PWLS10-PWLS10-20V-TC-002-DE.pdf (1.71 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (EL)
TRT-BA-PWLS10-PWLS10-20V-TC-002-EL.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (EN)
TRT-BA-PWLS10-PWLS10-20V-TC-002-EN.pdf (1.70 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (ES)
TRT-BA-PWLS10-PWLS10-20V-TC-02-ES.pdf (1.84 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (FI)
TRT-BA-PWLS10-PWLS10-20V-TC-002-FI.pdf (1.71 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (FR)
TRT-BA-PWLS10-PWLS10-20V-TC-002-FR.pdf (1.71 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (HR)
TRT-BA-PWLS10-PWLS10-20V-TC-002-HR.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (HU)
TRT-BA-PWLS10-PWLS10-20V-TC-002-HU.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (IT)
TRT-BA-PWLS10-PWLS10-20V-TC-002-IT.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (LT)
TRT-BA-PWLS10-PWLS10-20V-TC-002-LT.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (LV)
TRT-BA-PWLS10-PWLS10-20V-TC-002-LV.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (NL)
TRT-BA-PWLS10-PWLS10-20V-TC-002-NL.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (NO)
TRT-BA-PWLS10-PWLS10-20V-TC-002-NO.pdf (1.71 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (PL)
TRT-BA-PWLS10-PWLS10-20V-TC-002-PL.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (PT)
TRT-BA-PWLS10-PWLS10-20V-TC-002-PT.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (RO)
TRT-BA-PWLS10-PWLS10-20V-TC-002-RO.pdf (1.72 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (RU)
TRT-BA-PWLS10-PWLS10-20V-TC-002-RU.pdf (1.73 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (SV)
TRT-BA-PWLS10-PWLS10-20V-TC-002-SV.pdf (1.71 MB)
Operating manual cordless work light PWLS 10 / PWLS 10-20V (TR)
TRT-BA-PWLS10-PWLS10-20V-TC-002-TR.pdf (1.71 MB)