Air purifier TAC 6500
Availability: Immediately available
Air purifier TAC 6500
Worldwide unique and exclusive only at Trotec: Mobile air purifier with Vario-Shift and Flowmatic function for construction site to clean room.
Clean in the room, clean is the room - as efficient as it is simple with the TAC 6500 professional commercial air purifier.
The TAC 6500 reliably ensures effective air purification even of large air treatment areas and can be used variably for construction site as well as clean room renovations - all with just one device!
This unique flexibility of use is made possible above all by the innovative Vario-Shift function of the TAC 6500, thanks to which the filter chain can be optionally configured either with terminal fan or HEPA filter, as is prescribed for cleanroom environments, for example.
Flexible equipment with filter combinations to suit your needs
With dust class H, this extremely powerful air purifier is the perfect solution for extracting air and cleaning the most diverse large-volume work areas with polluted air.
In addition, the TAC 6500 impresses with its ability to combine different filter modules as needed, allowing an optimal filter chain to be put together for any level of room air pollution.
From the paint mist filter to the HEPA filter H13 with approval for dust class H to the high-performance filter of class H14 for effective virus filtration - the TAC 6500 can be equipped with the optimum filter combination for every application.
Advantage Vario-Shift function - unique worldwide
Conventional air cleaners with rigidly arranged filter chains are very suitable for use in construction site areas, but they are completely unsuitable for sanitation work in cleanroom environments and are therefore not permitted there. The HEPA filter must therefore be installed downstream of the fan as the last link at the end of the filter chain.
Made clean: All in one for clean & room
In turn, a rigidly arranged filtration row with terminal HEPA filter, as prescribed for cleanroom environments, would be economically absolutely useless for remediation work involving mold infestation in standard environments, because the fan would then be contaminated with spores and would have to be cleaned and disinfected at great expense each time.
However, until now it has not been possible to cover both requirement areas flexibly and conveniently with just one air cleaning unit without the use of additional attachments.
Thanks to the worldwide unique Vario-Shift function, however, TAC air purifiers from Trotec can be adapted variably and in accordance with regulations for all application scenarios.
As the only mobile air purifiers on the market, only Trotec's TAC units are equipped for a quick change of position of fan and HEPA unit, so that you can arrange the filter chains for standard or clean room applications in the required sequence as needed at any time.
FlowMatic control for constant flow rate
To achieve the air exchange rates specified for the indoor spaces to be treated, a constant volume flow is mandatory throughout the entire period of use. However, the filter elements used in each air purifier gradually clog up, resulting in increasing backpressure and decreasing air flow over time.
Conventional air cleaners therefore use significantly higher starting values to compensate for this, but this increases wear on the filter elements and ultimately still does not guarantee that the target value will not be exceeded over the entire period of use.
Against all resistance: the flow rate holds
With the innovative Flowmatic control system of the TAC 6500, you will never have to worry about falling air performance or air change rates again. The sensor-based Flowmatic is unique in the world and works in principle like the "cruise control" in your car:
The Flowmatic sensors record the actual values of the air flow rate within the entire filter chain and continuously adjust the system performance dynamically, so that the once numerically preset air flow target value is kept constant in every situation! This not only increases filter service life and system efficiency, but also guarantees compliance with the legally prescribed air exchange rates.
The optimum solution for every air purification task
Air purification in the construction sector
High dust concentrations can occur during many construction activities, not only when angle grinders are used or during blasting, chiselling and demolition work, but also when dry mortars, fillers or tile adhesives are mixed. The TAC 6500 reliably filters construction dust from the air in continuous operation and automatically alerts you visually and acoustically as soon as a filter change is necessary.
Air purification during painting work with airless paint spraying systems
Equipping the TAC 6500 with a special paint mist filter not only keeps the room air free of paint particles, but also improves the quality of the paint surface.
Mold and asbestos remediation
Particularly dangerous are dusts from quartz-containing stones, artificial mineral fibers, wood, cellulose and asbestos. In addition, there is the exposure to spores, allergens and microfibers, for example during building, insulation layer or mold remediation. With the TAC 6500, you are on the safe side here, because this air purifier has dust class H and is approved for asbestos removal in accordance with TRGS 519.
Clean room sanitation as well as microbial and viral air purification
Using the Vario Shift function, the TAC 6500 can be variably configured with a terminal HEPA filter, as prescribed for cleanroom environments. If required, the HEPA filter compartment can also be equipped with an H14 filter for effective separation of viruses and other airborne contaminants in the particle range 0.1 to 0.2 µm.
- Asbestos dust
- Quartz dust
- Construction waste
- Flour and wood dust
- Mineral fibers
- Mold spores
- Paint particles
- Bacteria and viruses
Typical areas of application:
- Blasting work
- Construction and remodeling work
- Water damage restoration
- Fire damage restoration
- Mold remediation
- Asbestos abatement
- Cleanroom applications
Advantages for the practice:
- Professional quality "made in Germany" - original Trotec manufacture
- Unique in the world: Variable use for construction site and cleanroom renovation with only one device
- Dust class H, approved for asbestos removal in accordance with TRGS 519
- Already prepared for future BG guidelines for the use of portable air cleaning units
- Vario-Shift function for application adaptation of the filter chain with terminal fan or HEPA filter
- Sensor-based Flowmatic control for automatic maintenance of the preselected air volume
- Monoventic controller for precise infinitely variable air volumes
- Visual and audible change indicator for pre-filter and main filter
- Stacking aid, impact protection and forklift entry pockets as standard equipment
- Easy filter change due to quick top unlocking mechanism
Please note that the filters are not included in the scope of delivery!
Attention! Only use original replacement filters from Trotec. Only these are suitably designed and tested for your device. Cheap imitations usually do not achieve the specified filter values or guarantee the air volumes for which your device is designed. Thus, your device may be damaged and, depending on the field of application, there may be a health risk for those who are in the rooms.
|as per DIN EN 60335-2-69||H|
|Air flow rate|
|Max. air volume flow [m³/h]||5,700|
|Negative static pressure [Pa]||1,150|
|Recommended amount of air for filter class H [m³/h]||3,000|
|Air volume with filter surface H13 > [m²]||26|
|For variable filter configuration|
|Mains connection||230 V, 50/60 Hz|
|Power input [kW]||1.4|
|Nominal current consumption [A]||6|
|Recommended fusing [A]||10|
|Connection plug||CEE 7/7, H05RN-F|
|Cable length [m]||3|
|Air transport hose connector|
|Suction side ø [mm]||450|
|Blow-out side ø [mm]||450|
|Distance 1 m [dB(A)]||68|
|Length (packaging excluded) [mm]||1,252|
|Width (packaging excluded) [mm]||790|
|Height (packaging excluded) [mm]||1,026|
|(packaging excluded) [kg]||136|
|Equipment, features and functions|
|Infinite adjustment of air volume|
|Flowmatic regulation of air volume|
|Thermal filter decontamination|
|Filter change indication|
|combination Coarse dust (≤ 3 ACH)||G4|
|Suitable for rooms sized up to Coarse dust (≤ 3 ACH) [m³]||1,400|
|combination Fine particulates (≤ 3 ACH)||G4 + F7 / F9|
|Suitable for rooms sized up to Fine particulates (≤ 3 ACH) [m³]||750|
|combination Suspended matter (≥ 10 ACH)||G4 + H13|
|Suitable for rooms sized up to Suspended matter (≥ 10 ACH) [m³]||200|
|combination Hygienic areas (≥ 15 ACH)||G4 + H13|
|Suitable for rooms sized up to Hygienic areas (≥ 15 ACH) [m³]||135|
|Swivel casters with parking brakes|
|Full-rubber guide wheels|
|Non-marking rubber wheels/rollers|
|Shock protection frame|
|Trestle rollers/ fixed castors|
|Guiding wheels pneumatic tyres|
TRT-CE-TAC5000_TAC6500-HS-001-DE.pdf (110 KB)
TRT-CE-TAC5000_TAC6500-HS-001-EN.pdf (110 KB)
TRT-BA-TAC5000_6500-TC-001-DE.pdf (1.9 MB)
TRT-BA-TAC5000_6500-TC-001-EN.pdf (1.8 MB)
TRT-BA-TAC5000_6500-TC-001-FI.pdf (1.7 MB)
TRT-BA-TAC5000-6500-TC-001-FR.pdf (1.2 MB)